Call us now for a quote
01983 404997

Our guarantee to you

1. Your expectations of quality will be met in the service we provide

2. Your orders will be delivered on time

3. Your orders will be cut from quality approved materials, where we have supplied the material

4. You will receive a service tailored to your requirements

5. Your information will remain confidential

Our Services

Our aim at Hydromar is to deliver to our customers the best that waterjet technology has to offer - therefore our core service is waterjet cutting. A commitment to quality is matched by an essential focus on customer service and technical support. We also offer some additional in-house manufacturing services (listed below) to augment the process and to help deliver to our customer a finished / semi-finished item.


Additional in-house manufacturing services:






Design and development / rapid prototyping / tooling / jigs

Using our engineering expertise, we also design and manufacture simple jigging and tooling for use both in our own advanced processes and those of our customers. As there is usually no tooling involved in waterjet cutting, it is an efficient and economic solution for rapid prototyping and product development, where prototypes and incremental development can be manufactured without incurring setup or tooling costs.



We can work with customer supplied CAD files (We find that .dxf or .dwg format usually give us the least compatibility problems). However if you don't have a CAD drawing, we have staff members who are able to convert your part / template / sketch into a CAD drawing suitable for use in our process.


Material – stock holding

We hold a significant amount of material stock so that we are able to offer quick turnaround for our customers (the following list is not exhaustive):

Ferrous -   S275 and S355

Non ferrous   - Stainless steel - grades 316 / 304

                       Aluminium - grades 5083 and 6082 T6

                       Copper  /  brass

Rubber / plastics:  Neoprene / EPDM / Viton / Silicone rubber / UHMWPE / PTFE / Acrylic / Polyurethane

MDF / Plywood


We will work with either customer issued material or our supply and can source most material for cutting within 2-3 days. We will also hold supplies of customer free issue material for call off through agreement.


Additional manufacturing processes (subcontract)

In the quest to streamline supply chains and reduce the number of suppliers, we are continually asked to offer additional services. Our position is that we will remain focused on our core capability but will work with a small number of selected sub-contractors (who are both our customers and suppliers) to offer the following services.  We will always be clear with our customers when we are proposing to use sub-contractors.


Welding / fabrication

Powder coating

Zinc passivation

We are well known for our flexibility, attention to detail and 24 hour production, providing our customers with the fastest turnaround in the industry. We are growing year on year by delivering the level of service our customers demand.



Arrived this morning at 9:30, thank you to everyone involved in getting these to us so quickly!

      Ross C - Laser Profiling Company

An accurate cut, especially considering the awkward shape... The quality of the cut also meant that no polishing of the edges was required.

      Tanieth W - Gurit

Thanks for all your help. That general service and attitude is what helps us all go forward.

      Paul Larsen - World Record Holder - Vestas Sailrocket 2

I am also taking this opportunity to thank you again for the excellent re-activity that you demonstrated in producing all our springs so diligently and quickly.

      Andrew H - British Gas R & D

We've been very pleased with the work you've done for us on the panels and the steel.

      Stephen H - Oil & Gas Sector

I wish all our suppliers were as good as you, very pleased with the work you do for us and if there ever is an issue you sort it.

      Chris S - Electronics Equipment Manufacturer

The last set of parts you made for me were first class. They were sent to Australia for some underwater metrology work and the job was successfully completed. The client was very pleased with the results. 

      Alistair F - Oil & Gas ROV Manufacturers

I had QC through to see me the other day, they were very complementary and said they are the best we have seen for a long while.

      Kevin S - Specialist Diving Equipment Manufacturer

Parts are already here, thanks for the great service, it gets me out of a BIG hole.

      Ian C - Specialist Precision Sheet Metal Workers